Sale!

Battery Powered RGBYW Light Tube

$45.80$480.00

(1 customer review)

RGBW LED tube is a full-color gamut T12 film tube, remote control, DMX512 protocol wired control, lamp master and slave control, self-contained lighting effects, the console can be programmed. LCD Display, DC socket connect with AC power directly.

Clear
Add to Wishlist
Add to Wishlist

Description

RGB LED tube is a full-color gamut T12 film tube, high brightness, high
quality, remote control, and simple structure, free combination of LED soft light.
Lighting features: Color temperature 2700-10000K adjustable, can be fine-tuned G, and
even adjust the color temperature of traditional candle lights 1700K; RGB full color
gamut can be adjusted (HUE, Saturation); RGBWY five colors can be independently adjusted.

Features:

1) Built-in battery, 100% brightness can last 2.5 hours;

2) Full-color RGB tube, 2700K-10,000K;

3) Wired DMX to adjust brightness and color temperature;

Wireless DMX to adjust brightness and color temperature (supports AC100-240V charging);

4) Wireless DMX console control

5) TLCI>96, CRI>96

6) Effect: Brightness,Rate,Strobe,Paparazzi,Shortout,Cop car1,Cop car2,Fire,Rainbow

7) Control features: Lamp tube control, wireless 2.4G remote control, DMX512 protocol wired

control, lamp master and slave control, self-contained lighting effects, the console can be programmed

Specification:

Light Fixture
Color Temperature2,700-10,000K
Color Accuracy StandardCRI >96 | TLCI>96
Dimming0 – 100%
Fixture Dimensions2ft 686x44mm / 4ft 1262x44mm / 8ft 2413x44mm
Watt25W /50W / 100W
AC Input PowerNeutrik provides AC100-240V
DC Input Powercamera battery 12-36V provide start power
ControlWired / Wireless DMX to adjust brightness and color temperature
Battery100% brightness can last 2.5 hours
Wired DMX to adjust brightness and color temperature
Wireless DMX (Support AC100-240V charging)

 

1. Tube Body Introduction:

led space light control board

1)- pairing and unpairing buttons. Clicking pairing on host; pressing and holding 5S on slave, the green light flashing indicates that cancel pairing is successful.
2)- wireless switch indicator. Blue light is always on, indicating that wireless is on, blue light is off,
indicating that wireless is off.
3)- communication indicator, green light.
2 and 3 are combined, blue and green lights are always on, indicating that slave is successfully paired; blue
light is always on and the green light is blinking, indicating that slave is waiting for pairing;
4) – USB upgrade software interface.
5) – display shows the status of the fixture.
6) – “+” button indicates that the value is increased and the menu is scrolled up.
7)- “√” button indicates that the data button is confirmed and entered.
8)- “-” button indicates that the value is reduced and the menu is scrolled down. .

battery powered LED tube

 

2. Menu Introduction:

Ø Brightness: 0-100%,Unit: 1%
Ø CCT:  From 2700k to 10000k,Unit: 100k

Ø G/M: 100M-0G-100G, Unit: 1G/M

Ø HUE: Hue (Color) 0°-359°,Unit: 1°
Ø SAT: Saturation 0-100%,Unit: 1%
Ø GEL: 1700K-2000K-2700K-3200K-5600K-Red-Green-Blue-Magenta-Yellow- Orange
Ø RGBW: R-G-B-W(6000K)-Y(2700K)

Ø Effect: Brightness、Rate、Strobe、Paparazzi 、Shortout、Cop car1、Cop car2 、Fire、

Rainbow

Ø Set up: DMX(addressProfile), M&S(Master,Slave,Off) ,WirelessIDOn/Off)

Language(CN indicates Chinese, EG indicates English), Reset, About(Version of software, duration)

Note:
1. Effect: Exit the effect interface, operate the color temperature, G/M, Hue, SAT, and GEL to cancel the effect mode automatically.
2. SAT shows 100%, it is in full-color mode, adjustment of color temperature and G/M is unresponsive; SAT shows 0%, it is in white mode, adjustment of HUE is unresponsive.
3. Reset: Perform reset to power off and re-power on. After power-on, the status is: brightness 100%, color temperature 3200K, G/M 0G, Hue 0°, SAT 100%, DMX address 1, Profile 1, slave, wireless (ID 1, on), language.
4. After resetting, the slave cancels pairing with the previous Master, waiting for pairing.

5.Profile: Please see the below details.

 

3.Wireless pairing:

1) Setting the host: Turn on the wireless switch, M&S, as the Master.
2) Setting the slave: Press and hold the pairing button for 5s, cancel the pairing, turn on the wireless switch, M&S,
set as slave.
3) Clicking the pairing button on master and waits for 5-10S. Slave follows the change of Master and pairs
successfully. If the slave does not match successfully, please operate slave again to cancel the pairing, and then press
Master pairing.
4) Slave displays the following wireless interface and can also follow the Master change, indicating that the
Wired DMX connection: the connection is successful.
Set as slave, wireless shutdown, set the required profile and DMX address, default Profile 1 and DMX address 1, then
connect the DMX signal line, turn on the console light tube, if the display interface displays the DMX interface as shown
below, indicating that the connection is successful.

battery powered led tube DMX

 

1) ID 001 indicates the product number.
2) ADD 001 indicates DMX channel 001.
3) P1 01 indicates Profile 1.
4) DMX512 indicates it has been linked with the DMX console.
5) K indicates the wireless signal strength. 4 cells indicate strong signal, 1 cell indicates weak signal instability.

battery powered led tube profile

 

Tubes wireless control

Tubes wireless control

dmx wireless control

dmx wireless control

control for APP

control for APP

RGBWW led tube accessories

RGBWW led tube accessories

Additional information

Weight5.5 kg
Dimensions135 × 19 × 15 cm
Length

2ft 25w battery, 4ft 50w battery, 8ft 100w battery, Wireless control, DMX control, App signal control, 2ft eggcrate, 4ft eggcrate, 8ft eggcrate, 2ft 25w No Battery, 4ft 50w No Battery, 8ft 100w No Battery

1 review for Battery Powered RGBYW Light Tube

  1. R.Presutti

    I was viewing your web, your tube led light baterry product, could it be of interest to our market, as an alternative to Astera tubes, could you be interested in a collaboration? For you it is possible to send us your product brochure with accessories and to know the prices you can offer us.

    • axflexmat

      Yes Presutti, I already sent you an email. please check sales@axflexmat.com; Thanks.

Add a review

Your email address will not be published. Required fields are marked *

Post comment