We’re looking at is the Battery powered RGBW led tube; these are light weight (0.78g for 4ft) they are much cheaper and they’re around 200;
2ft 4ft 8ft available
I want to discuss about these lights is their ability to be powered with no power connection,they can be powered off batteries or AC100-240V, 2.5 hours battery built into each module at a hundred percent output. I will say that I did test that and it’s really close so when I was out put at a hundred percent I got about 2.5 hours of runtime.
You will need to account for the charge time that is required for each one of these lights and I would recommend that you plug each light into its dedicated power adapter and allow it to charge because it will take about four hours to charge all the way up to a hundred percent so looking at this end of the light there’s a power button.
This light is rated at 96 CRI and has 2,700 to 10,00 Kelvin output;
Here we have Four buttons you have menu enter CCT G/M RGB HUE SAT GEL and special these lights offer the ability to do special effects like Brightness,Rate,Strobe,Paparazzi,Shortout,Cop car,Fire, Rainbow…
This is absolutely awesome you can get some really interesting things for photography especially and the accuracy in that not non-flicker even at really low percentages;they do go from zero to ten percent dimness and they have an effective lighting capacity at those percentages; they’re separate RGB lights and like white color lights when it comes to the kelvins so you have RGB LEDs and then the white color spectrum so it really is an awesome set.
Support manual, APP, Wired and wireless DMX control module;
Master/Slave Mode allows one lamp to control many lamps at once. The master transmits DMX data wired or wirelessly to the followers.
The tube can be controlled through DMX with standard DMX protocol control.
More questions can contact us free. Thanks for reading. welcome your opinions.
