RGBW LED Tube with Internal Battery -

RGBW LED Tube with Internal Battery

RGB LED tube is a full-color gamut T12 film tube, high brightness, high quality, remote control, and simple structure, free combination of LED soft light.

Control features: Lamp tube control, wireless 2.4G remote control, DMX512 protocol wired control, lamp master and slave control, self-contained lighting effects, console can be programmed.

Lighting features: Color temperature 2700-10000K adjustable, can be fine-tuned G, and even adjust the color temperature of traditional candle lights 1700K; RGB full color gamut can be adjusted (HUE, Saturation); RGBWY five colors can be independently adjusted.

2. Menu Introduction:

Ø Brightness: 0-100％，Unit: 1%

Ø CCT: From 2700k to 10000k，Unit: 100k

Ø G/M: 100M-0G-100G, Unit: 1G/M

Ø HUE: Hue （Color） 0°-359°，Unit: 1°

Ø SAT: Saturation 0-100%，Unit: 1%

Ø GEL: 1700K-2000K-2700K-3200K-5600K-Red-Green-Blue-Magenta-Yellow – Orange Ø RGBW: R-G-B-W(6000K)-Y(2700K)

Ø Effect: Brightness、Rate、Strobe、Paparazzi 、Shortout、Cop car1、Cop car2 、Fire、 Rainbow

Ø Set up: DMX（address，Profile), M&S(Master, Slave, Off), Wireless（ID， On/Off) Language(CN indicates Chinese, EG indicates English), Reset, About(Version of software, duration)

RGBW LED Tube with Internal Battery details

3.Wireless pairing：

1) Setting the host: Turn on the wireless switch, M&S, as the Master.

2) Setting the slave: Press and hold the pairing button for 5s, cancel the pairing, turn on the wireless switch, M&S,set as slave.

3) Clicking the pairing button on Master and waits for 5-10S. Slave follows the change of Master and pairs successfully.

If slave does not match successfully, please operate slave again to cancel the pairing, and then press Master pairing.

4) Slave displays the following wireless interface and can also follow the Master change, indicating that the connection is successful.

Set as slave, wireless shutdown, set the required profile and DMX address, default Profile 1 and DMX address 1, then connect the DMX signal line, turn on the console light tube, if display interface displays the DMX interface as shown below, indicating that the connection is successful.